Paver Driveway installation in Westlake Village, California.

Paver Driveways designed for Westlake Village

The front driveway is the single most photographed hardscape on your property; it decides how the home reads from the street. Golf-course-adjacent patios and lakefront pool decks in Westlake Village. For Westlake Village specifically, lakeside humidity and golf-course adjacency reward slip-resistant, non-fading pavers. We design every paver driveway in Westlake Village around those local conditions — the material palette, base section, and drainage detail all move with the site, not a generic Southern California spec.

Neighborhoods we install in

We regularly build paver driveways in North Ranch, Sherwood Country Club, Three Springs, Westlake Island. Each has its own material vocabulary — historic overlays, HOA architectural review, hillside grading, coastal exposure — and we design the paver driveway accordingly.

• North Ranch
• Sherwood Country Club
• Three Springs
• Westlake Island

Permits and HOA review in Westlake Village

Sherwood and North Ranch each maintain HOA hardscape standards we design to. For a paver driveway specifically, we prepare 3D renderings, cut sheets, and specification narratives formatted for your review committee or Ventura County Building & Safety counter. Straightforward by-right installs move without permit; anything requiring review, we handle end-to-end.

What's included in our installed price

Our $18–$35 per installed square foot for a Westlake Village paver driveway covers everything a defensible bid should:

• Demo and haul-off of existing surface
• Excavation to sub-base depth
• 6–8 inches of compacted Class II road base in lifts
• 1 inch of ASTM C33 bedding sand, screeded
• Concrete, interlocking, or unit pavers (Angelus, Belgard, Orco, Techo-Bloc)
• Polymeric joint sand and joint stabilization
• Edge restraint at every unsupported perimeter
• Custom borders, soldier courses, and cut plans
• 25-year installation warranty

ICPI-standard installation

Every paver driveway we install in Westlake Village follows Interlocking Concrete Pavement Institute (ICPI) standards or better — the accepted engineering baseline for segmental paver assemblies in North America. That means aggregate base sized to intended load, ASTM C33 bedding sand, precision plate compaction, polymeric joint stabilization, and edge restraint at every unsupported perimeter. Where drainage or code demand it — and in Westlake Village it often does — we integrate channel drains, French drains, or a fully permeable base.

Why homeowners in Westlake Village pick pavers over concrete

Poured concrete looks acceptable for the first two seasons in Westlake Village, then hairline-cracks under thermal cycling, stains under irrigation and tree drop, and reads as builder-grade the moment the property is photographed. Segmental pavers behave differently: individual units flex with the ground instead of fracturing across it, and any single unit can be lifted and re-set decades later without a demolition scar. For a paver driveway in Westlake Village, that difference compounds every year the home is owned.

Replacing a concrete driveway in Westlake Village

Most paver driveways we build in Westlake Village replace a failing concrete driveway: cracked across the field, lifted at tree roots, stained by irrigation, patched in a lighter gray. We demo and haul off the old surface rather than pouring over it, rebuild the sub-grade with 6–8 inches of compacted Class II base, and set the driveway pavers over a screeded sand course so the finished surface stays flat as the soil moves. A new concrete driveway in Westlake Village typically runs $10–$18 per square foot installed and stamped concrete $18–$28, against $18–$35 per installed square foot for the paver assembly — the difference buys a surface that can be lifted, reset, and repaired unit by unit for decades.

Looking for a paver driveway contractor near you in Westlake Village?

Paver Exchange is a paver contractor — not a landscape generalist who also sets driveway pavers. We run out of our own yard at 20 N. Aviador St in Camarillo, hold California contractor license #1042565, and install to ICPI standards. Crews are W-2 employees, one project manager owns your Westlake Village site from demolition through final walk-through, and every proposal includes a free photorealistic 3D rendering before you sign.

• Paver Driveway installation in Westlake Village, CA
• Driveway Pavers supply and install — Angelus, Belgard, Orco, Techo-Bloc
• Concrete driveway removal, haul-off, and full base rebuild
• Permeable paver driveways for Westlake Village drainage and stormwater requirements
• Free 3D rendering, itemized pricing, and a 25-year installation warranty