Paver installation in Westwood, California.

Why Westwood homes choose pavers over concrete

Westwood homeowners invest at the top of the market, and their hardscape has to hold that standard for a generation. Poured concrete looks acceptable for the first two seasons, then hairline-cracks under thermal cycling, stains under irrigation and tree drop, and reads as builder-grade the moment the property is photographed. Segmental pavers behave differently: individual units flex with the ground instead of fracturing across it, and any single unit can be lifted and re-set decades later without a demolition scar.

For Westwood specifically, marine-adjacent humidity, mature-canopy shade, and ucla-area density favor permeable and tumbled paver formats. We design every Westwood project around those local conditions, not a generic California spec.

Neighborhoods we build in

We regularly install in Little Holmby, Westwood Hills, Comstock Hills, Century Woods, and we know the material palettes, setback rules, and street-facing standards that hold in each. Every proposal we submit for a Westwood home is rendered in 3D, priced line-by-line, and formatted to move through review committees without revision cycles.

• Little Holmby
• Westwood Hills
• Comstock Hills
• Century Woods

HOA approvals and permitting in Westwood

Little Holmby and Comstock Hills each review street-facing hardscape; we prepare committee packages. We produce the drawings, material samples, and specification narratives your association or the local Building & Safety counter expects to see. Because we install exclusively in paver, our submittals aren't recycled from a broader landscape practice — they're purpose-built for the material and the jurisdiction.

Materials and design language for Westwood

We install concrete pavers, interlocking pavers, unit pavers, and flagstone — sourced from Angelus, Belgard, Orco, Belgard Artforms, and Techo-Bloc. For Westwood, we typically steer clients toward large-format textured concrete pavers with tumbled edges or a coordinated flagstone accent — finishes that read as architectural rather than suburban. If your home has a defined architectural style, we match paver format, joint width, and border detail to it rather than defaulting to a house pattern.

Engineering standards we install to

Every paver assembly we install in Westwood follows ICPI (Interlocking Concrete Pavement Institute) standards or better. That means an aggregate base sized to the intended load (driveways receive a 6-to-8 inch Class II base minimum), a screed layer of ASTM C33 bedding sand, precision compaction with a plate compactor rated for the paver, joint stabilization with polymeric sand, and edge restraint at every unsupported perimeter. Where drainage matters — and in Westwood it usually does — we integrate channel drains, French drains, or a fully permeable base assembly.

Timeline and process

A typical Westwood driveway or patio project runs 2-4 weeks from contract to completion once material is on site. Design and rendering take one to two weeks up front; production install runs 5-10 working days for most residential scopes. We staff the project with our own W-2 crews — no subcontracted labor — and one project manager owns the site from demo through final walk-through.

Looking for a paver company near you in Westwood?

We're a paver company — not a landscape generalist who also sets pavers. Paver Exchange runs out of its own yard at 20 N. Aviador St in Camarillo, holds California contractor license #1042565, and is ICPI certified for interlocking concrete pavement. Crews are W-2 employees, one project manager owns your Westwood site from demolition through final walk-through, and every proposal includes a free photorealistic 3D rendering before you sign. Little Holmby and Comstock Hills each review street-facing hardscape; we prepare committee packages. If you're comparing paver companies serving Westwood, here's more about how we work and what to ask any contractor.

Every paver service we install in Westwood

Each of these is a full service with its own crew, spec, and pricing — follow the link for the Westwood page on that specific scope, with local photos, cost ranges, and FAQs.

• Driveway pavers in Westwood — motor courts, ribbon drives, and steep approach grades
• Patio pavers in Westwood — dining terraces, fire features, and shaded yards
• Pool deck pavers in Westwood — cool-touch, slip-resistant surfaces around existing pools
• Walkway pavers in Westwood — front entries, side yards, and garden paths
• Permeable pavers in Westwood — irrigation runoff and stormwater compliance
• Steps and planter walls — grade transitions on Westwood hillside lots

Replacing a concrete driveway or patio in Westwood

Most of the hardscape we replace in Westwood is twenty-to-forty-year-old poured concrete: cracked across the field, lifted at tree roots, stained by irrigation, and patched in a lighter gray. A new concrete driveway in Westwood typically runs $10–$18 per square foot installed and stamped concrete $18–$28, while driveway pavers start around $18 and reach about $35 per square foot on estate or hillside work. The difference buys a surface that flexes with the soil instead of fracturing over it, and that can be lifted and reset unit by unit for decades.

• We demo and haul off the existing slab — never pour over the old surface
• 6–8 inches of compacted Class II base replaces the failed sub-grade
• Tree-root zones get flexible detailing so lifting can be reset, not jackhammered
• Utility trenches can be opened and closed later without a patch scar
• Typical Westwood concrete-to-paver conversion: 5–10 working days on site

What paver installation costs in Westwood

Installed paver pricing in Westwood averages about $18 per square foot and tops out near $35 per square foot on the most demanding estate or hillside work. Price moves with access, demolition, grade change, and paver format — not with your zip code. Every figure below is installed, including base excavation, compaction, edge restraint, jointing, and cleanup.

• Westwood paver driveway (600–900 sq ft): roughly $11,000–$28,000 installed
• Paver patio (400–600 sq ft): roughly $7,000–$18,000 installed
• Pool deck resurfacing in cool-touch pavers: typically $20–$30 per square foot
• Front entry walkway (120–200 sq ft): typically $2,500–$6,000 installed
• Steps and planter walls: quoted per grade change

Nearby cities we serve in West Los Angeles

We also install across the rest of West Los Angeles — including Malibu, Pacific Palisades, Santa Monica, Brentwood, Bel Air, Beverly Hills, Culver City, Century City, Mar Vista, Marina del Rey. Same W-2 crews, same 25-year warranty, same design process. If you're comparing Westwood to a neighboring community, we can price both from the same rendering.

• Malibu
• Pacific Palisades
• Santa Monica
• Brentwood
• Bel Air
• Beverly Hills
• Culver City
• Century City
• Mar Vista
• Marina del Rey