Westlake Village · Paver Pool Decks

Paver Pool Deck installation in Westlake Village, California.

Paver pool decks in Westlake Village typically run $22–$35 per installed square foot and take 2–4 weeks from contract to completion in 2026. Pool decks live in a corrosive micro-climate — salt, chlorine, and sun — and pavers are the only surface that ages gracefully through all three. Golf-course-adjacent patios and lakefront pool decks in Westlake Village.

Last updated January 2026

Installed price
$22–$35 / sq ft
Typical size
500–1,000 sq ft
Timeline
2–4 weeks
Warranty
25 years

Paver Pool Decks designed for Westlake Village

Pool decks live in a corrosive micro-climate — salt, chlorine, and sun — and pavers are the only surface that ages gracefully through all three. Golf-course-adjacent patios and lakefront pool decks in Westlake Village. For Westlake Village specifically, lakeside humidity and golf-course adjacency reward slip-resistant, non-fading pavers. We design every paver pool deck in Westlake Village around those local conditions — the material palette, base section, and drainage detail all move with the site, not a generic Southern California spec.

Neighborhoods we install in

We regularly build paver pool decks in North Ranch, Sherwood Country Club, Three Springs, Westlake Island. Each has its own material vocabulary — historic overlays, HOA architectural review, hillside grading, coastal exposure — and we design the paver pool deck accordingly.

  • North Ranch
  • Sherwood Country Club
  • Three Springs
  • Westlake Island

Permits and HOA review in Westlake Village

Sherwood and North Ranch each maintain HOA hardscape standards we design to. For a paver pool deck specifically, we prepare 3D renderings, cut sheets, and specification narratives formatted for your review committee or Ventura County Building & Safety counter. Straightforward by-right installs move without permit; anything requiring review, we handle end-to-end.

What's included in our installed price

Our $22–$35 per installed square foot for a Westlake Village paver pool deck covers everything a defensible bid should:

  • Demo and haul-off of existing surface
  • Excavation to sub-base depth
  • 6–8 inches of compacted Class II road base in lifts
  • 1 inch of ASTM C33 bedding sand, screeded
  • Concrete, interlocking, or unit pavers (Angelus, Belgard, Orco, Techo-Bloc)
  • Polymeric joint sand and joint stabilization
  • Edge restraint at every unsupported perimeter
  • Custom borders, soldier courses, and cut plans
  • 25-year installation warranty

ICPI-standard installation

Every paver pool deck we install in Westlake Village follows Interlocking Concrete Pavement Institute (ICPI) standards or better — the accepted engineering baseline for segmental paver assemblies in North America. That means aggregate base sized to intended load, ASTM C33 bedding sand, precision plate compaction, polymeric joint stabilization, and edge restraint at every unsupported perimeter. Where drainage or code demand it — and in Westlake Village it often does — we integrate channel drains, French drains, or a fully permeable base.

Why homeowners in Westlake Village pick pavers over concrete

Poured concrete looks acceptable for the first two seasons in Westlake Village, then hairline-cracks under thermal cycling, stains under irrigation and tree drop, and reads as builder-grade the moment the property is photographed. Segmental pavers behave differently: individual units flex with the ground instead of fracturing across it, and any single unit can be lifted and re-set decades later without a demolition scar. For a paver pool deck in Westlake Village, that difference compounds every year the home is owned.

Frequently asked

Answers.

How much does a paver pool deck cost in Westlake Village?
$22–$35 per installed square foot in 2026 in Westlake Village — averaging in the low-to-mid $20s per square foot for standard scopes. Pricing includes demo, base, material, installation, and a 25-year installation warranty.
How long does paver pool deck installation take in Westlake Village?
A typical Westlake Village paver pool deck runs 2–4 weeks from contract to completion. Design and rendering take one to two weeks; production install is 5–10 working days for most residential scopes.
Do you pull permits for paver pool decks in Westlake Village?
For projects requiring grading, drainage, hillside, or HOA design review, yes — we prepare the plan set and coordinate the submittal. Most straightforward paver pool decks in Westlake Village are by-right and do not require a permit.
Are pavers approved by Westlake Village HOAs?
Sherwood and North Ranch each maintain HOA hardscape standards we design to. We provide the material samples, cut sheets, and 3D renderings your review committee expects.
Do you install permeable paver pool decks in Westlake Village?
Yes. Permeable systems qualify for stormwater and drought-response programs in many Southern California jurisdictions and solve drainage problems that would otherwise require permitted civil work.
Can we see a 3D rendering before signing?
Yes. Every Westlake Village homeowner sees a photorealistic 3D rendering of their finished paver pool deck before contract, included in our design proposal at no cost.

Continue reading

By City

Locally installed across Southern California.

Same crews, same warranty, same design process — in every community below.

Related

Explore more from Paver Exchange.

Prefer a Text?

Send your number. A real person will text you back within one business hour.

No email, no address, no photo required. Once we have your number, Roberto or the design team will text you personally.

No spam. Once you send your number, we'll text you back personally.

By submitting, you agree we can call or text you back about your project.

Or Get A Free 3D Rendering

Canonical: /paver-pool-deck/westlake-village